Hi all, I'm new to Astrisk so bear with me. I have just installed AsteriskNOW and am quite familiar with RH Linux. I have configured it and am using Xlite to connect and learn to move around the conf files. I have a problem, however. The client connects and dials ok, but there is no audio. In searching the archives I found discussion of this issue primarily centered on NAT issues. This is not my issue (I think). Here is some info:
1. * server and clients are all on the same subnet but are separated from the internet by a proxy/firewall which forces all port 80 traffic through the proxy. 2. The server has a single channel fxo card. 3. Snip of sip.conf: [test] type=friend secret=verysecret regexten=1234 ; When they register, create extension 1234 callerid="Test Unit" <1234> host=dynamic ; This device needs to register nat=yes ; X-Lite is behind a NAT router canreinvite=no ; Typically set to NO if behind NAT disallow=all allow=gsm ; GSM consumes far less bandwidth than ulaw ;allow=ulaw ;allow=alaw [EMAIL PROTECTED] ; Subscribe to status of multiple mailboxes context=internal Here is the problem: Xlite registers fine. When I dial 500 to access the demo, the * console shows the client connect and the demo audio plays. However, there is no sound on the client end. I have installed Xlite on an XP workstation and on a *nix workstation. Both installs behave the same. Any thoughts? Or do I need to post more details? Thanks, Chris _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users