Further to this, I believe that my problem is that I'm also now running udev.
When I compiled and installed Zaptel, I did the make install-udev step, however the permissions in my udev directory don't look correct. I am running Asterisk as root (this is on a debian system btw), but this is the content of my zaptel.rules file. # zaptel devices with ownership/permissions for running as non-root KERNEL=="zapctl", NAME="zap/ctl", OWNER="asterisk", GROUP="asterisk", MODE="0660" KERNEL=="zaptranscode", NAME="zap/transcode", OWNER="asterisk", GROUP="asterisk", MODE="0660" KERNEL=="zaptimer", NAME="zap/timer", OWNER="asterisk", GROUP="asterisk", MODE="0660" KERNEL=="zapchannel", NAME="zap/channel", OWNER="asterisk", GROUP="asterisk", MODE="0660" KERNEL=="zappseudo", NAME="zap/pseudo", OWNER="asterisk", GROUP="asterisk", MODE="0660" KERNEL=="zap[0-9]*", NAME="zap/%n", OWNER="asterisk", GROUP="asterisk", MODE="0660" zaptel.rules (END) What do I need to do for Asterisk to be able to see the Zaptel device while running as root? Again, any help is much appreciated. Regards, Mark. From: Mark Davies Sent: Friday, 9 March 2007 4:13 PM To: '[email protected]' Subject: Zaptel problem after upgrading to 1.2.16 Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Any help much appreciated before I go insane... J Regards, Mark.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
