> i am having callerid problems with *. i have the > callerid from my telco and it shows up in my normal > phone when i connect it directly to the line but if i > connect the same phone thru * server the callerid is > not shown. i am using X101p and tdm400p. i have > everything defined in my zapata.conf well and fine. i > finally came to conclusion that this might have > happened due to the registration of country with > zaptel in the zaptel.conf. i am in nepal. if anyone > could help, that would be great.
I have a friend with two phone lines (Bell Canada) -- both with CID, both plugged in to their own X101P card. One line gets CID just fine, the other has problems (1 in 6 calls have CID come through for *). A regular old phone in either picks up CID every time. Swap the lines so that they're going into the other X101P; problem stays with line. Change cabling up to demarc, no change in problem. The only thing I can come up with is that the FSK softmodem in * is a little too strict, and the one line is a little too loose. :-) Regards, Andrew _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
