Tzafrir Cohen wrote:
On Thu, Mar 08, 2007 at 03:19:00PM -0500, Steve Totaro wrote:
The trick is modifying the source in zaptel file: wctdm.c and changing
to the following then doing a make clean, make && make install.
static int timingonly = 1;
The original value was a zero.
No need to change the source. That is already a parameter settable at
module load time, if not at run-time.
At module load time, manually:
modprobe wctdm timingonly=1
permanently: add to /etc/modprobe.conf or /etc/modprobe.d/something
options modprobe wctdm timingonly=1
At run-time:
echo 1 >/sys/modules/wctdm/parameters/timingonly
Though for some older 2.6 kernels it will be:
echo 1 >/sys/modules/wctdm/timingonly
That "parameter" file is also readable, and shows the curent value of
the variable.
Actually, it would make alot more sense to do both, modify the source
and load the module with the timingonly=1 option.
That way you set the correct behavior by default so a simple modprobe
wctdm would work if you forgot the option, and also have a backup if you
upgrade your zaptel source down the road and forget that you need to set
timingonly=1 before compiling.
Thanks,
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
