Hi, i had the same problem recently for sip. my scenario was that i connected 2 asterisk servers and dialed from one asterisk to another. and for sending the DNID i used the following comand:
exten=> 1,1,Dial(SIP/[EMAIL PROTECTED]) here riz is the channel name. hope this works with zap also On 3/15/07, Mark Quitoriano <[EMAIL PROTECTED]> wrote:
Hi i have an asterisk pbx with E1 port connected to another PBX. Im trying to send the DNID/DNIS to the PBX here's my dialplan exten => 8881111111,1,Dial(ZAP/g2) exten => 8881111111,n,Hangup() The PBX just get the number 2 as it's DNIS when i change it to ZAP/1 or ZAP/g1 the PBX get the number 1. What should i add to send the extension number as DNID/DNIS? Thanks! _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Regards Rizwan Hisham Software Engineer
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
