Hi Steve,
as you know if you type "show hints" inside asterisk console you can see
phone status. When a phone is not connected, Asterisk says it is
Unavailable. With Asterisk 1.2.9.1 my SNOM leds worked well so I knew
when a phone was not available but with Asterisk 1.4.1 is not possible
anymore. This is one of the functions which I'm trying to keep from
Asterisk 1.2.9.1 to 1.4.1 .
TIA
Giorgio Incantalupo
Steve Murphy wrote:
On Wed, 2007-03-21 at 13:55 +0100, Giorgio Incantalupo wrote:
Hi Steve,
thank you for your help, I set up the call-limit parameter and SNOM
light are working good for ringing and busy status. I took a look at
sip.conf.sample but nothing about unavailable status. Should I set some
other parameter or there is some "trick"? Consider that my firmware
phone is updated to the last available version.
TIA
Giorgio Incantalupo
Giorgio--
no tricks, sorry!... I've got a snom360 here, and I've been slowly
working my way thru the buttons myself. There's a config file option to
make the "Retrieve" button work, you provide a name for an extension for
it to use. You then provide
that extension in the context for the phone, that does the
VoiceMailMain() call.
The "Record" button uses a SIP "INFO" message to asterisk, that isn't
implemented, so that's not going to work at the moment.
What does "unavailable" mean, and how do you get that way?
murf
Steve Murphy wrote:
On Thu, 2007-03-15 at 15:33 +0100, Giorgio Incantalupo wrote:
Hi,
I'm testing Asterisk 1.4.1 with Snom phones but leds are not working to
show which devices are busy/not connected. The same phone worked with
Asterisk 1.2.9.1.
I would appreciate anyone who knows how to setup Asterisk 1.4.1 to
behave as 1.2.9.1.
Giorgio--
That's a pretty generic question! But that aside, there's been a
substantive change in the configs for SIP phones, that could easily
affect your device state monitoring.
So, suggestion: read the example sip config file in the src/configs dir,
pay close attention to stuff like call-limit, the limitonpeers stuff,
etc, and then make sure you update all your phone entries in sip.conf.
Restart asterisk, or reload sip, and hopefully your lights will work.
In general, EVERYONE, here's some advise: When you
upgrade from version "1.x" to "1.(x+2)", always review ALL
your config files against the new config file examples.
Things change! Hopefully, for the better!
murf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
