From: Barton Fisher <[EMAIL PROTECTED]>
Date: Fri, 23 Mar 2007 09:26:44 -0800
I have some old PC's I want to build as a test box - It's up and running OK
now. Now I installed a TDM400P and there is nothing I can do to get the
card to come up. My guess is the box is not PCI 2.2 compliant or does it
need to be to see the card?
I had a similar situation. What I found was: the CMOS setup program had an
option to turn PCI 2.2 on or off - default was off. Later motherboards no
longer have this.
Yuan Liu
Thanks, Bart
Here's what I know:
Processors 1
Model Pentium III (Katmai)
CPU Speed 551.37 MHz
Cache Size 512 KB
System Bogomips 1103.57
PCI Devices
- Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
- Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
- Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
- IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
- ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA
- PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
- USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
- VGA compatible controller: Chips and Technologies F69000 HiQVideo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
