Hi Pierre and the list, I have the habit to do like this after having compiled Zaptel and Libpri :
cd /usr/src/ wget http://www.misdn.org/downloads/mISDN.tar.gz wget http://www.misdn.org/downloads/mISDNuser.tar.gz tar xzf mISDN.tar.gz tar xzf mISDNuser.tar.gz cd mISDN-1_1_1 make install cd ../mISDNuser-1_1_1 make install Move the modules which are in the bad directory : mkdir /lib/modules/`uname -r`/extra cp /lib/modules/extra/*.* /lib/modules/`uname -r`/extra Make the mISDN config files : /etc/init.d/misdn-init config Start mISDN : /etc/init.d/misdn-init start Go ahead and compile Asterisk : cd /usr/src/asterisk-1.4 ./configure make menuselect ; choose your options ! make;make install I hope this help ! Best Regards, Francois BERGERET, France. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Pierre Burton Envoyé : mardi 27 mars 2007 10:09 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [asterisk-users] Asterisk 1.4 and chan_misdn Hi, you also need mISDNuser. After that make clean && make install you'll have access to chan_misdn. Regards. Pierre Administrator TOOTAI wrote: > Hi list, > > I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from > SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in > zaptel dir and: make, make install, make b410p. Everything is ok. Now I > want to compile Asterisk but can't activate the chan_misdn channel which > depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) > > When I made the make b410p, all the misdn stuff was downloaded from > digium's ftp. Also, running /etc/init.d/misdn-init --scan show me the 2 > cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf > and after a /etc/init.d/misdn-init start I see: > > mISDN_dsp 191656 0 > mISDN_capi 88716 0 > mISDN_l2 34452 0 > mISDN_l1 11036 0 > mISDN_core 71360 6 > mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 > kernelcapi 44576 2 mISDN_capi,capi > > My questions: why Asterisk doesn't want to let me activate the misdn > channel? Is misdn ready for 1.4? > > Thanks for any hint > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users