On Wed, 28 Mar 2007, Alan Chandler wrote:
I cannot seem to get any transfers to work at all. The console show I
have #1 amd #2 set up for Blind and Attended Transfer, but when I hit
these buttons on my handset nothing happens (other than I hear the dtmf
tones on the other end of the line).
roo*CLI> show features
Builtin Feature Default Current
--------------- ------- -------
Pickup *8 *8
Blind Transfer # #1
Attended Transfer #2
One Touch Monitor *1
Disconnect Call * *0
I am using the tT options in my dial calls (via a macro)
[macro-extension]
exten => s,1,Dial(${ARG1},20,tT)
I had to fiddle with other things to make this work (needed for the
Siemens CP4600 SIP/DECT phone)
I found that the default timeouts were a bit tight for my likings (and the
people who I was testing this with!)
So in features.conf I have:
transferdigittimeout = 8 ; Number of seconds to wait between digits when
transfering a call
featuredigittimeout = 999 ; Max time (ms) between digits for
; feature activation. Default is 500
[featuremap]
blindxfer => #1 ; Blind transfer
atxfer => ## ; Attended transfer
disconnect => #0 ; Disconnect
If it's still not working, are you sure the DTMF is being picked
up/transmitted correctly? If it's in-band, is it a codec other than G711?
(which might give you problems)
Gordon
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
