Steve Langstaff wrote:
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Drew Gibson
Sent: 29 March 2007 17:13
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Multi-line phones - Asterisk
uses wrong callerid
Thanks Andrew, I understand the issue now.
Removing "insecure=very" allows the Grandstream phones to
work, they register separate lines on separate ports (eg Line
1=5060, Line 2=5062, etc).
Unfortunately I cannot find a port setting for the Aastra
480i, I shall get on their case.
Do you perceive it as a fault with Aastra, for not registering using
separate ports, or Asterisk, for not handling multiple registrations
from the same port?
At this point, I would not like to point fingers, I have not talked to
Aastra.
1. Asterisk seems to be assuming that IP/port is the unique key and
the account name is less important.
2. Aastra seems to be assuming that account name is the unique key and
the IP/port is less important
My personal leaning is that account name should be the key (as domain
name presides over IP address when web-hosting) but I am not familiar
with how this is normally done in the SIP world.
regards,
Drew
--
Drew Gibson
Systems Administrator
OANDA Corporation
www.oanda.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
