This is my problem. I don't even know it this is the right site to ask
for it, but let's go.
I've a Asterisk box with 1.4.1 version version installed. It's equipped
with a TDM400 with 2 FXO modules and a HFC based ISDN BRI card.
Everything goes OK, except for the following scenario:
on the PMP S0 bus of the ISDN telecom NT adapter I've connected both a
ISDN modem and the HFC card. Now:
1. when the modem IS NOT connected, I could receive (and obviously
answer) up to two calls and the (eventually) third one get a busy signal
(right).
2. when the modem IS connected (it's set up to use only 1 channel) I
could receive (and answer) to only one call (right). But, if a third
call comes in, the phone designed to ring in extension.conf rings
(wrong!) and the calling party ears the ringing tone! If I try to
answer, both ends ears the busy signal and the other conversations (the
first I've responded and the modem connection still run).
What's wrong?
Thanks for any help
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
