Dan, I have been working with the new version and have discovered a strange issue. When I place a call from a DIAX phone, all seems to generally work properly. However, calls placed from either of my SIP agents (Grandstream 101 hardphone and X-PRO softphone) or from the PSTN via X100P often fail to connect.
This is especially true if DIAX has previously received a call, and that call has been disconnected from the remote end. I have watched the Gastman (graphical asterisk manager) application, and my own Call Manager application and both indicate that the system _is_ ringing the DIAX channel. The DIAX just never rings, or changes to a state where the user can answer the incoming call. A few experiments: I. When the DIAX hangs up the call (is the _first_ party to hang up) the call is terminated cleanly in all tests. When the remote party (the GS or XTEN) breaks the connection, the GS does not always drop the connection immediately (though the Manager shows the call being torn down and both parties dropping out). When this occurs the DIAX will not ring another incoming call -- it requires a restart first. II. This does not always happen. Sometimes the DIAX will stop responding even if it properly hangs up. Also, sometimes it takes several calls before DIAX stops responding. III. Even if DIAX has stopped responding to incoming calls, it is still capable of making outbound calls, apparently without any problem. IV. Even when DIAX doesn't immediately detect the handup (or respond to the hangup event) and it is manually hung up after the call is torn down, it is _sometimes_ still capable of receiving incoming calls. Could this have something to do with my configuration? For what it's worth, I don't see any errors in the Asterisk log. Thanks Steve _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
