If I have several local networks, can I specify that? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric "ManxPower" Wieling Sent: Thursday, March 29, 2007 1:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] SIP & NAT
Mike Hammett wrote: > I hate SIP. The only reason I'm doing this is that its cheaper than > deploying the server to a colo facility. My provider has given me a > non-standard IP block, so I can't do typical routing. > > > > I have Asterisk server <-> MT w\NAT <-> PPPoE <-> MT <-> Provider. > > > > I setup a dst-nat on 5060 to the Asterisk box. > > > > Audio from Asterisk --> PSTN works great. Audio Asterisk <-- PSTN does > not. That would be expected since you did not forward the ports used for RTP. See /etc/asterisk/rtp.conf A sample is in the Asterisk source. Did you also set localnet= and externip= options in sip.conf [general]. SIP works just fine with NAT if you have it correctly configured and your server is on a static IP address. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
