Lspci does show: 03:02.0 Ethernet controller: Digium, Inc.: Unknown device 0120 (rev 11)
dmesg | tail ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. lp: driver loaded but no devices found NET: Registered protocol family 10 Disabled Privacy Extensions on device c0344160(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present Using CentOS 4.4 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: Monday, 2 April 2007 3:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Problems with TE110P On Mon, Apr 02, 2007 at 02:56:30PM +1000, Klaverstyn, David C wrote: > Type in cat /proc/zaptel/* displays > > Span 1: ZTDUMMY/1 "ZTDUMMY/1 1" The driver has not picked up your card. > > > But if I type in > lsmod | grep -i wct > > I get > wcte11xp 26016 0 > wct4xxp 221120 0 > zaptel 184996 3 ztdummy,wcte11xp,wct4xxp Two things to do: 1. What is the output of: lspci 2. What really happens when the module loads? rmmod wcte11xp modprobe wcte11xp dmesg | tail What linux distribution is it? -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
