Good Morning Armin, >> tried the patch, but it did not work. It waits quite a long time >> before the chan-capi error message comes up, according to the time >> stamp it is about 12 seconds. It is kind of strange, that the whole >> startup process for asterisk usually takes only about 4-5 seconds.
> That's too long, normaly the confirmation message arrives within a few > msecs. So it seems that the driver isn't responding. > >> Do you need additional information? > > Which card/driver do you use? [EMAIL PROTECTED]:~# lspci -s 0:0e -v 00:0e.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02) Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN Controller Flags: medium devsel, IRQ 10 Memory at ff001400 (32-bit, non-prefetchable) [size=32] I/O ports at dcc0 [size=32] [EMAIL PROTECTED]:~# capiinit status 1 fcpci running fcpci-dcc0-10 A1 3.11-07 0xdcc0 10 Driver from ubuntu edgy > A debug log (capi trace) from the driver or kernelcapi helps to see > what messages are wrong/missing. What is the best way to produce this? -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users