On Tue, Apr 03, 2007 at 11:17:57PM +0200, bram kortleven wrote: > Hi, > > I recently decided to change my setup from AsteriskNow to plain-asterisk > 1.4, which I wanted to set up and configure myself on a server running > Debian Etch 64bit version. > > Hardware: > Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at > 2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone > card. > > Running the AsteriskNow, everything worked fine, except for incoming > calls, not being routed right, but they entered the system, and mostly > they ended up into the voicemail. > > To change that behaviour and to have more control of what I'm doing, I > reinstalled the same machine with Debian Etch, the 64bit version, as the > CPU (and the replacing one in a few weeks) runs EM64T nicely... > The setup ran OK, compilation etc too, except for zttool which I still > cannot compile.
apt-get build-dep zaptel Or specifically: apt-get install libncurses-dev (or something similar) > > When configging the server, I used several HowTo's and guides, but no > solution: > > hereby the config parts that I did/changed: > > /etc/zaptel.conf: > > # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit > # Zaptel Configuration File > # This file is parsed by the Zaptel Configurator, ztcfg > # It must be in the module loading order > # Span 1: WCFXO/0 "Generic Clone Board 1" > fxsks=1 > # Global data > loadzone = be > defaultzone = be > > > /etc/asterisk/zapata.conf: > > [channels] > signalling=fxs_ks > group=1 > context=incoming > channel=>1 ;X100P > > > /etc/asterisk/extensions.conf: > [incoming] > exten => s,1,Echo ;for testing the connection > ;exten => s,1,Playback,demo-thanks ;for playing a file > > > Nothing happens when dialing in. > > BUT: > ztmonitor 01 -vv gives levels, and when dialing in, the levels change > according to dialtone in my phone I use for calling the server. > > AND: > core show channels gives me this: > > asterisk*CLI> core show channels verbose > Channel Context Extension Prio State > Application Data CallerID Duration > Accountcode BridgedTo > 0 active channels > 0 active calls > > > > What am I doing wrong??? > Anyone that can give a hand? What is the output of: zap show channels -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users