On Wed, 4 Apr 2007, Brian McEntire wrote:
Don't think that was it unless I still have a typo. Here's my line
from extensions.conf:
exten => _#78,n,Set(DB(DND/${CALLERID(num)})=1)
in the CLI issued 'reload' after saving the updated extensions.conf
and then picked up the phone and dialed #78. Still getting this error:
[Apr 4 08:56:20] WARNING[6866]: func_db.c:94 function_db_write: DB
requires an argument, DB(<family>/<key>)=value
Should DB support be built in by default?
It seems that it's already there (else you'd not get an error from
func_db)
Is there a DB schema I need to consult to make sure I have the right
family key pair?
I do the same with:
exten => *49,n,Set(DB(${CALLERID(num)}/doNotDisturb)=1)
So I keep them the other way round.
Why not put in something like:
exten => _#78,n,Noop(DB(DND/${CALLERID(num)})=1)
and just see what it says? Maybe your callerId is somehow not being set
correctly?
I'm using a Zaptel driver so maybe the CALLERID(num) var is not set or
is confusing the Set line. I think the zap comes up Zap/2.
I'd definately check the caller-id - if it's a local phone on an FXS port,
then you might even want to hard-wire the caller-id in the
/etc/asterisk/zapata.conf file. eg.
; Channel 1: Local analogue line
context=internal
group=0
signalling=fxo_ks
sendcalleridafter=2
rxgain=3
txgain=3
mailbox=100
callerid=Shared DECT <100>
channel => 1
Gordon
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
