On Fri, Apr 06, 2007 Tzafrir Cohen wrote: > On Fri, Apr 06, 2007 at 01:18:24AM +0200, Henrik Woffinden wrote: > > Hello list, > > > > After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently > > detected as 2 ports instead of 4. > > > > I still load the driver as "modprobe qozap ports=12" as I've always > > done. But now it only sees 2 ports. > > Output of "lspci -vvv" > > ------ cut -------- > > 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network > > Controller [HFC-4S] (rev 01) > > Subsystem: Cologne Chip Designs GmbH Unknown device b560 > > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > <TAbort- <MAbort- >SERR- <PERR- > > Interrupt: pin A routed to IRQ 22 > > Region 0: I/O ports at ddb8 [size=8] > > Region 1: Memory at fcefa000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: [40] Power Management version 2 > > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > > PME(D0+,D1+,D2+,D3hot+,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > ------ cut -------- > > Just a comment: the CHANGES file has the item "fixed detection of > miniPCI cards (qozap)". Take a look at the diff between qozap/qozap.c > in -d and in -e . > And have a look at code parts where the hex constant 0xb5xx is mentioned. This part of the code differentiate between 2-, 4- and 8-port cards (and between the rev. 2.0 of the hardware).
I found this values: Card Junghanns Beronet 2-Port 0xb556 0xb566 4-Port 0xb520 0xb560 4-Port, Rev. 2.0 0xb550 ???? 8-Port 0xb552 0xb562 8-Port, Rev. 2.0 0xb55b 0xb56b Looks like You are using 4-Port Beronet with old Hardware-Revision. I think the if clauses with the PCI-Ids fall through to some defaults which now doesn't work for Your card. The "pure" bristuff does not support any of the beronet cards but the old default behaviour of the code is correct for the 4 port model of beronet cards. Btw: Does someone know the PCI-ID of 4-port Beronet Rev. 2.0? Have nice easter weekend, Karsten _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
