Joe Acquisto wrote:
Lee Howard <[EMAIL PROTECTED]> Wrote: 4/6/2007 2:15 PM:
Joe Acquisto wrote:
AFAIK, the FAX targets are normal FAX machines, on the PSTN.
What happens is, there appears to be a dial out, and a FAX negotiation, but
What it always fails.
What does zttest say about your zap card configuration/installation?
If
it's not always 99.98% or better then it's due to hardware resource
constriction and you need to escalate the zaptel card's priority on the
hardware (like putting it at a lower IRQ).
Lee.
zttest does not exist on this system, Suse 10 based. IIRC, I never found the
file(s) needed to compile it.
It's usually built and left in the zaptel source directory where you
extracted and built zaptel. If it doesn't get built for you from
zttest.c then check the Makefile that it has zttest in BINS like this
from mine:
BINS=ztcfg torisatool makefw ztmonitor ztspeed zttest fxotune
Lee.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
