You could try to get it working but it may never be 100%. If your needs
are 100% then I suggest using a standard fax and get an analog line and
do it the old fashioned way. If you need Hylafax type features then buy
a modem that is compatible with Hylafax and run it on a different box.
Just suggestions.
Thanks,
Steve
Jose Limeres wrote:
I searched extensively on this and did not find anything conclusive
except the general understanding that on TDM cards every instalation
is different whereas for BRI /PRI it should work.
As for the config, Asterisk just works perfectly well with voice
conversations over the FXO line. I add one IAX extension in * for the
IAXModem and then in the IAXmodem configure the default modem as the
one that is registered in *. If I make a Fax call to my mobile, it
rings and I can hear the Fax on the other side. So, the problem I
believe is in the negotiation/sinchronization where something is
broken at some point.
I would like to know wether it is possible to solve this adjusting
some parameter in some config file or I should just forget it and use
a digital line instead.
Thanks,
Jose L.
CLI>
-- Accepting AUTHENTICATED call from 127.0.0.1 <http://127.0.0.1>:
> requested format = slin,
> requested prefs = (),
> actual format = alaw,
> host prefs = (alaw),
> priority = mine
-- Executing [EMAIL PROTECTED]:1] Dial("IAX2/200-1",
"Zap/g1/956855858") in new stack
-- Called g1/956855858
-- Zap/4-1 answered IAX2/200-1
-- Hungup 'Zap/4-1'
== Spawn extension (default, 956855858, 1) exited non-zero on 'IAX2/200-1'
-- Hungup 'IAX2/200-1'
CLI>
> faxstat -s
JID Pri S Owner Number Pages Dials TTS Status
35 126 S root 956855858 0:1 1:12 11.19 No carrier detected
On 15/04/07, *Steve Totaro* < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Yuan LIU wrote:
>> From: "Jose Limeres" < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>
>> Date: Sun, 15 Apr 2007 19:10:58 +0100
>>
>> Hi,
>> Anybody lucky with this config inside an Asterisk server for
dealing
>> with
>> FAX ?
>>
>> FXO_LINE ----> ASTERISK 1.4.2 ---> IAXMODEM ------> HYLAFAX
>> TDM400P ZAPTEL
>> 4.3.1
>> 1 FXO port 1.41
>
> Search Asterisk forum. Yes, somebody posted positive results.
>
> Yuan Liu
I have had great results via PRI -> Asterisk -> IAXModem -> Hylafax
Post your log results and configs.
Thanks,
Steve
>
>>
------------------------------------------------------------------------
>> I know Fax is not officially supported on TDM400P cards but I
did not
>> expect
>> not being able of sending one single Fax.
>> Actually when I try to send a Fax, the call is established
between my *
>> server and the remote Fax but after 30 secs Asterisk
disconnects the
>> call
>> and Hylafax reports NO CARRIER DETECTED.
>>
>> Tried playing around with a few parameters such as no
>> echocancellation, alaw
>> (also slinear) codec, faxdetection =incoming in zaptel but with
no luck.
>>
>> Regards,
>> Jose Limeres
>
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
