[EMAIL PROTECTED] wrote:
Trying to find my feet here. If I wanted to connect Asterisk to a PRI and
throw in a T1 Adtran channel bank into the mix for fax machines would the
following work?
Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P.
Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P
also, would I need a crossover to the channelbank or is it a patch lead
like the connection to the PRI
any hints / tips greatfully received
thanks to Steve Totaro for the nudge in the right direction!
Phil
I think you will have good luck. Just make sure you use no echo can
when bridged. Also, you will need a T1 Crossover cable.
I have used channel banks quite a bit but never for the amount of faxing
you are looking at. Maybe someone has better input but I would
certainly try it myself and feel good about it going in.
I bought a 24 port FXS TSU 600 for $200 used on Ebay for the lab, so you
may want to go the Used route before buying something new.
Thanks,
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
