On Tue, Apr 17, 2007 at 09:51:02AM -0600, Greg Woods wrote:
> On Tue, 2007-04-17 at 13:47 +1200, Aaron Martin wrote:
>
> > If I manually run the following commands:
> >
> > modprobe zaptel
> > modprobe wctdm
> > ztcfg -vvv
> > asterisk -vvvc
> >
> > Then SOMETIMES asterisk will work perfectly with the zap channels, allowing
> > both
> > incoming and outgoing calls as per my dialplan.
>
> I realize this is a bit of a shot in the dark, but with FC6 and a
> TDM-400 31B (3 FXS, 1 FX0), I found that I had to also load the
> wctdm24xxp module. This really shouldn't be needed, and lsmod shows it
> isn't actually used, but my card wouldn't work correctly without it.
My guess: timing.
Remove all the calls to ztcfg from modprobe.conf, use a proper init.d
script, and you won't need to modprobe anything except wctdm .
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
