Greetings;
We are trying to get Asterisk up and happy at our site-we tried VOIP using Sphere about a year ago, spent a *boodle* on expensive hardware and services from a local "expert", but it never was happy. I'm brand-spanking new at VOIP, and I've learned a *ton* getting Asterisk breathing in the last couple of days. I have three Polycom Soundpoint IP 500 SIP phones, which are all working wonderfully, when talking to each other. Voicemail seems happy, too....Now to get it talking to the outside world. In our previous trial, we purchased an AudioCodes MP-104 MGCP gateway. I'm supposing that something needs to be set up in mgcp.conf for it, but what I've tried just hasn't worked. Here's what I have: ----- [general] port = 2427 bindaddr = 0.0.0.0 [mp104-1] host = 192.168.10.179 callgroup=1 context=default callerid="Incoming Line 1" line => aaln/1 ----- In the Asterisk CLI, I'm getting "NOTICE[12321]: chan_mgcp.c:1656 find_subchannel_and_lock: Gateway 'mp104-1' (and thus its endpoint '*') does not exist"...several of them, every few minutes. Is there someone out there who wouldn't mind sharing relevant sections of the .conf files to get this thing *basically* working? Incoming calls should fall on a specific extension (199), outgoing should be accessible by keying 9+the number. All our long distance, 1-800 outbound, etc, all go out the same four lines...this is a *simple* setup. Apologies if this is something that's been answered before, or if I've just missed the link I need, and thanks in advance for any assistance you can give. Our old PBX has perished, and I need to get this breathing *quickly*. J. David Bavousett System Administrator Abilene Library Consortium _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
