> > I'm interested. I'm running chan_capi 0.3.0 with Fritz PCI ISDN card. Using > > DIAX as softphone and dialing out to PSTN generally results in good sound > > quality at softphone end (no echo), but PSTN end experiences quite a bit of > > echo. I have enabled echosquelch in capi.conf, but it does not seem to help > > Then my idea is not your solution, nor is echosquelch, I guess. Yes, it > would be possible to kludge chan_capi to alleviate your problem; no, I > do not think it would be the right solution. If the far end hears echo, > it's coming from the near end, that is from your softphone. You could > try to use something else to confirm that (a hardphone?). I suggest > that you play with the mixer settings on your own machine, because it's > your sound card that's recording the far end's voice!
I do not have a hardphone to play around with, but the echo is there both with built-in audio card (SigmaTel) and Bluetooth headset. There are no mixer settings than I can adjust as well. I'll try disabling AGC and/or lowering mike sensitivity. Peter _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
