Hello All,
To avoid conflicts I removed TE405P and left the TDM400P and
reconfigured the card using "genzaptelconf".
When I run ztcfg -vv I saw the card and modules are loaded and also I
used "ztmonitor 1 -v" and I saw the gain moving up and down. I did
create trunks and outbound routes using FreePBX...
Now for some odd reason Asterisk is not picking up the incoming call
from PSTN.
zapata-channels.conf
===============
; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
;;; line="1 WCTDM/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 1
context=default
...
zapata.conf
========
#include zapata-channels.conf
Can anyone put some light why Asterisk is failing to pickup the call.
Regards,
Nitesh
Dave Miller wrote:
Nitesh Divecha wrote on 5/1/07 10:28 AM:
Is it possible to have both Digium cards installed on one Server
(TDM400P and TE405P)?
I have one site which requires both connection POT and T1/E1.
How can I configure both cards?
Should work just fine. The Zaptel drivers will pick up both. Just be
forewarned, the T1/E1 channels will all get numbered before the POTS
channels, no matter what order they're on the bus, so 1-24 will be your
T1 and 25-28 the POTS, for example. (I think E1 goes to 32?)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
