On Thu, 2007-05-03 at 17:56 +0200, lenz wrote: > Hello list, > hope someone can help me - I'm going crazy using the FXO port a SPA3012. > I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that > is, once it detects a call, it should simply send it over to the local > Asterisk server. No intelligent routing, PIN, anything else.... > > I configured it like this: > > PSTN-To-VoIP Gateway Setup > PSTN-To-VoIP Gateway Enable: yes > PSTN Caller Auth Method: none > PSTN Ring Thru Line 1: no > PSTN Caller Default DP: 1 > > Then I configured the dialplan #1 as: > Dial Plan 1: (S0<:@gw1>)
And that's where it started to go wrong. (S0<:[EMAIL PROTECTED]:5060>) will do what you want. -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users