Jim, What happens in your first senario is an attended transfer, after User1 and 3 have initiadted their call, User1 should press transfer again to complete the transfer. At which point User1 will be disconnected and Users 2 & 3 will talk.
The second issue is the limit of digits and is likely due to a very short timeout in features.conf, check the entry transferdigittimeout. On 5/3/07, Jim Suber <[EMAIL PROTECTED]> wrote:
PBX: Asterisk 1.4 Phones: PSTN phone connected to TDM400 X-Ten Lite Polycom 430 Scenario Polycom 430 = User1 User2 calls User1(Polycom 430) asks to be transfered to User3 User1 does an attended transfer using the trnsfr button on the polycom User2 is placed in music-on-hold User3s phone rings. (So far so good Right?) User3 picks up the phone to answer User2 only to find that he is talking to User1 User2 is stuck in music-on-hold. FOREVER! The other two phones work exactly as they should using the # key Using the # key on the Polycom only allow the dialing of 1 number before Alice announces That there is no such extension. HELP!!!! Thanks in advance Jim _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Bruce Reeves Nortex Networks
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
