Thanks Guys...
Got the T1/E1 Card working... Digium Engineers helped... According to
them TE405P card must load first and then the analog TDM400P.
Other thing which I messed up was that I changed the configuration to T1
but forgot to remove the Jumpers from the TE405P card. So that was
causing Asterisk to fail...
Its working now but can anyone clarify that... Do I have to remove all
four jumpers to make T1 card?
Anyone can help me with this error?
May 4 10:41:10 WARNING[5171]: chan_zap.c:9134 pri_dchannel: PRI Error:
We think we're the CPE, but they think they're the CPE too.
Regards,
Nitesh
Tzafrir Cohen wrote:
On Thu, May 03, 2007 at 11:03:59PM -0400, Nitesh Divecha wrote:
Hello All,
Can anyone please post their working T1/E1 configuration...
Both '/etc/zaptel.conf' and '/etc/asterisk/zapata.conf'. I believe if
you run 'genzaptelconf' it created '/etc/asterisk/zapata-channels.conf',
so please post that one also.
What do you have in /etc/asterisk/zapata.conf ?
Here is my configuration which is failing Asterisk to load... I have two
cards TE405P and TDM400P: -
What error message do you get from asterisk at load time? You'll
typically see them in /var/log/asterisk/messages or
/var/log/asterisk/full
===========
/etc/zaptel.conf
===========
# T1 Configuration
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
span=3,1,0,esf,b8zs
bchan=49-71
dchan=72
span=4,1,0,esf,b8zs
bchan=73-95
dchan=96
fxsks=97
fxsks=98
fxsks=99
fxsks=100
# Global data
loadzone = us
defaultzone = us
========================
/etc/asterisk/zapata-channels.conf
========================
group = 1
switchtype = national
signalling = pri_cpe
context = from-zaptel
channel => 1-23
group = 2
switchtype = national
signalling = pri_cpe
context = from-zaptel
channel => 25-47
group = 3
switchtype = national
signalling = pri_cpe
context = from-zaptel
channel => 49-71
group = 4
switchtype = national
signalling = pri_cpe
context = from-zaptel
channel => 73-95
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 97
; context=default
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 98
context=default
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 99
context=default
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 100
context=default
Thanking in advance...
Cheers,
Nitesh
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
