-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Barry Porch Sent: Friday, May 11, 2007 8:44 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] A couple of questions for the Mitelgurus(phone-related - not systems)
Nigel, You cannot upgrade a non-dual mode 5220 to SIP. If you are referring to the cable that connects the 5310 to a 5235, that is a standard CAT5 straight-through cable. Barry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nigel Kendrick Sent: Friday, May 11, 2007 7:27 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] A couple of questions for the Mitel gurus(phone-related - not systems) Hi Folks, Just in case there are any Mitel gurus here: 1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to the SIP firmware? I have inherited one that's Minet only. 2) I have a 5310 conference unit and 5235 phone in SIP mode, but someone's lost the connecting lead. Can anyone recommend anywhere in the UK for a replacement lead or confirm the pin-out so I can check whether a generic RJ-RJ lead will work without frying anything. Thanks Nigel Kendrick Thanks Barry, I managed to find some specs for the 5310 and when it mentioned that it was PoE powered I took the plunge and tried a cat 5 patch lead and everything's working fine. Shame about the 5220 - but no big loss. Nigel _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
