Hi there!The driver from AVM only allows one Firtz card in a PC, there is a hack to run two but I don't know about 3.. Save yourself a lot of time and frustration and get a 4 BRI card from Eicon or AVM ( I believe the Eicon is better becasue it has echo cancellation but a little more expensive than the 4BRI AVM card) especially if its for an office install of that many users..
I'm currently considering various PBX solutions for our office telephone network, and would very much like to use Asterisk. Currently, my research is incomplete. I have been recommended to use the above cards, but it is unclear from my Googling whether my configuration will work:
- 3x Fritz!Card PCI's in one host. - 3x 6 b-channels. - ~20 Budgetone (and some others) handsets.
Can anyone answer these questions:
- Will the 3 ISDN cards function correctly in one host?
- Will running all 3 cards flat out require particularly beefy hardware?
- Will the Grandstream phones provide a good equivilant to professional dedicated PBX phones? (assuming a good network) I have read lots about echo problems and so on, is this an issue?
Any help in the matter would be very much appreciated. Thanks in advance!
The GS phones are fine and work well, they have a few quirks but these should be fixed on the next firmware upgrade..
If you are running GS phones then the only codec availible to you is the G.711, using this codec you will not need all that powerful a server.. A 1Ghz and above processor with 256+MB of RAM should be fine..
Later..
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
