hi there! I have a couple phones connected to a sipura ata and if I go into *- IVR, I press options on the regular phones and it all works fine and dandy.
then I connect an xten softphone, a new extension in my dialplan, I dial the ivr, * asks me to dial something to go through it, I press keys on xten, but nothing happens, * just times out through as if I did not press anything! is there some sort of configuration out there to tell the xten softphone to work as expected? thanks! Then another problem! I used the i extension, plus _X and _X. to make sure I catch everything that is not propperly dialed. If I take the regular phones that are connected through the sipura ata, then dial 'exten => 700,1,Goto(default,s,1)' so that I get the asking for an extension to reach, I dial a wrong number and walla, its caight by one of my magic numbers! BUT, if I pickup the same phone, and just dial the same wrong number? I just get a busy signal! and there is nothing registered at the CLI even though I added DEBIG to the configuration! :s What can I do to make sure I always send an error sound and never again a busy signal? thanks! ____________________________________________________________________________________ Bored stiff? Loosen up... Download and play hundreds of games for free on Yahoo! Games. http://games.yahoo.com/games/front _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
