Following zapata.conf works for us, interconnecting Asterisk - BCM.
Never tested with Alcatel though.
Jorge Mendoza
=====================
Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=es
context=from-zaptel
signalling=pri_cpe
switchtype=qsig
rxwink=300
loadzone=pe
defaultzone=pe
channel => 1-15,17-31 ;for E1
callerid=asreceived
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=6
callprogress=yes
faxdetect=incoming
============
Vieri wrote:
According to
http://www.voip-info.org/wiki/view/Alcatel+4400+via+PRI
the author had trouble with QSIG.
It would be great if you could give me an extract of
your zapata.conf in your successful QSIG setup. And
any other tip for that matter.
--- Jorge Mendoza <[EMAIL PROTECTED]> wrote:
In my experience, many times Qsig is mandatory for
interconnection
between Asterisk and others PBX using PRI.
Jorge Mendoza
Vieri wrote:
I'm having the same trouble when the
Alcatel-Asterisk
trunk has "prefix meaning" set to "open routing
number".
I enabled overlapdial but still get the same
behavior.
When it's set to "routing number" Asterisk
receives
the full dialed number but it's limited to a
maximum
of 8 digits.
Has anyone solved this "open routing number" issue
that passes only the first digit and ignores the
rest?
--- Sahil Gupta <[EMAIL PROTECTED]> wrote:
Hi,
You need to enable overlapdial.
Regards,
Sahil Gupta
Chief Executive Officer
VoiceValley Group of Companies
Phone: +61-7-30188403
Fax: +61-7-30188499
On Tue, 29 May 2007, Carlos Hernandez wrote:
Hi all:
We are looking for someone with experience in
Alcatel PBX - PRI - Asterisk
integration
Please get in touch off list.. We're wanting to
hire a professional
subcontractor, developer or company to get
around
some issues like these:
Asterisk shows PRI to Alcatel is up, but when
trying to dial from Alcatel to
Asterisk results in a disc tone
(Asterisk do send calls properly into Alcatel)
If / when we manage to get anything from
Alcatel,
we get just the first digit
of the number the user is intending to call..
Asterisk expects the whole
number at once, so it fails..
Most of the time we get nothing at all from
Alcatel, we think something is
missing, so Alcatel sees the link is down.
Please let me know if you have done this type of
work before. We are not
wanting to involve the Alcatel people, unless
really required.
Is there any special way to set up zaptel/zapata
so Alcatel detects the PRI
to be operational?
Is there any special way to receive the calls
once
the PRI is up?
Right now asterisk is set with: pri_net
Any information or hints will be greatly
appreciated
Thank you,
Carlos
NZ
____________________________________________________________________________________You snooze, you lose. Get messages ASAP with AutoCheck
in the all-new Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/newmail_html.html
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
