No. First the carrier and then the asterisk to the user. Look at the
diagram:
First: Carrier ------Ring-------> Asterisk
Then: Asterisk--------Ring---------> User
Rgds, Ricardo.
Rizwan Hisham escreveu:
Do you mean to say that -- first the carrier sends the msg
to us to ring and then the end user sends the msg to ring?
On 5/30/07, Ricardo Martins <
[EMAIL PROTECTED]> wrote:
It seems that the ring issue
is on the CARRIER-OUT signaling. It's
sending you a SIP-Ring-Message and your asterisk-box is sending it to
the callee. The second green line ".....is ringing" apears jut because
your box received a ring signal from the CARRIER-OUT. Got the point?
I don't know what the "left from hold" means but seems to be related to
the situation when we push the "flash" button on the phone to put "on
hold" and flash again to put "out of hold". But I'm realy not sure
about it.
Rgds, Ricardo Martins
Rizwan Hisham escreveu:
Here is my CLI output:
Called
[EMAIL PROTECTED]
--
SIP/CARRIER-OUT-007d0310
is ringing
-- Call on
SIP/CARRIER-OUT-007d0310 left from hold
--
SIP/CARRIER-007d0310
is making progress passing it to SIP/pepsi-00f267e0
i clearly notice that when the first orange cli msg appears then the
actual ringing starts. like this tone -- tone -- totone -- tone, and if
the callee is busy then tone -- tone -- tobeep beep .
does anyone know what this means: -- Call on SIP/CARRIER-OUT-007d0310
left from hold
On 5/30/07, Rizwan Hisham <
[EMAIL PROTECTED]> wrote:
Maybe
its a bug in asterisk 1.4.2
On 5/30/07, Rizwan Hisham <[EMAIL PROTECTED]
> wrote:
There
is no R/r option in my dial application.im
only using gM option here is the dialplan:
exten=>
_1X.,1,NoOp("Dialing Local!!!")
exten=>
_1X.,2,Dial(Sip/[EMAIL PROTECTED],,gM(payasyougo^${CDR(accountcode)}^${CDR(userfield)}))
exten=> _1X.,3,Hangup
On 5/30/07,
Ricardo Martins <
[EMAIL PROTECTED]> wrote:
You should (must!)
remove
any r/R parameter from your command. If you
do that, no false ring will be generated anymore...
Att, Ricardo.
Rizwan Hisham escreveu:
Hi all,
when a user dials any number, asterisk automatically generates ringing
which caller can hear, and after 2 - 3 rings asterisk detects that the
called user is busy, then caller hears busy tone. for example user
hears--- tone--tone--tobeep beep beep ---Can i some how eliminate the
false ringing at the start so that user hears only beep beep beep if
the called user is busy. I have used the R and r options in Dial
application but they dont work.
--
Rizwan Hisham
Software Engineer
AXVOICE Inc.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Rizwan Hisham
Software Engineer
AXVOICE Inc.
--
Rizwan Hisham
Software Engineer
AXVOICE Inc.
--
Rizwan Hisham
Software Engineer
AXVOICE Inc.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Rizwan Hisham
Software Engineer
AXVOICE Inc.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
