Yeah I've heard the same breaks in conversations myself. It simply goes silent for a few seconds - making both parties say the usual "sorry.. Missed that can you say again?"...
Connection quality via remote SIP (outside our network via internet) can be terrible (using GSM), though obviously theres a whole bunch of other issues there, so I'm focusing just on the internal network and IAX. Our connectivity to our IAX/PSTN provider is u-law, so should be ok but isn't. What does -p do ? Adrian -----Original Message----- From: Tzafrir Cohen [mailto:[EMAIL PROTECTED] Sent: 05 June 2007 19:21 To: Adrian Marsh Subject: Re: [asterisk-users] Hardware spec comparison On Tue, Jun 05, 2007 at 06:51:40PM +0100, Adrian Marsh wrote: > All, > > I've a question on A*k hardware. > > I'm running 1.2.18 on a Dell DC051 (Intel(R) Celeron(R) CPU 2.80GHz) > with 512mb RAM. > I'm supporting 60 users (Cisco 7940s each + Xlite PCs). > Call loads are low, max of about 10 simultaneous SIP/IAX calls. > CPU for A*k rarely goes above 2% as I can tell. > Its IP only, no E1/T1 cards present. > > > However, I get complaints of bad voice quality, especially on IAX2 > calls, silences etc. Can you verify those complaints? What codec do you use? I hope that ulaw/alaw and not some compressed codec. > > I'm wondering whether or not the machine needs a faster CPU, something > like a Duo, as I can't find any faults anywhere else that might cause > these blips. > > But the 2% CPU usage seems to suggest it shouldn't. try running asterisk with the option -p -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
