Ah... One question though - Obviously doesn't work for Meetme.. I know I can pre-program meetme to record conferences, but I don't see how to let users start the record on-the-fly.
Nothing at http://www.voip-info.org/wiki-Asterisk+cmd+MeetMe seems to suggest it can be done.. Can it? A. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Marsh Sent: 20 June 2007 10:38 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Inline record Scrap that... Tried the Set() method and it worked, so then I moved it from [general] to [globals] and it does now record the calls. A. -----Original Message----- From: Adrian Marsh Sent: 20 June 2007 10:06 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Inline record Hi Rob, (and Drew) Thanks for that info, it helped a lot. I've edited featuremap as detailed, and "show features" gives: ubiphone*CLI> show features Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # # Attended Transfer One Touch Monitor *1 Disconnect Call * * I've added the variable to [general] (although I think it should be "=" instead of "=>" according to the docs, and I've modified my Dial string to: exten => _6.,3,Dial(${TRUNK2}/${EXTEN:1},,wW) But on an call, I still although the DTMF is heard, it doesn't do anything that I can tell: (numbers hidden) Everyone is busy/congested at this time (1:0/0/1) -- Executing Dial("SIP/227-08865c90", "IAX2/ubigradout/***********||wW") in new stack -- Called ubigradout/************ -- Call accepted by 193.111.201.75 (format ulaw) -- Format for call is ulaw -- IAX2/ubigradout-16385 is ringing -- IAX2/ubigradout-16385 is making progress passing it to SIP/227-08865c90 -- IAX2/ubigradout-16385 stopped sounds -- IAX2/ubigradout-16385 answered SIP/227-08865c90 Jun 20 09:45:40 DTMF[22469]: channel.c:2350 ast_write: IAX2/ubigradout-16385 : * Jun 20 09:45:40 DTMF[22469]: channel.c:2350 ast_write: IAX2/ubigradout-16385 : 1 -- Hungup 'IAX2/ubigradout-16385' I'm expecting to see something about recording, and then a file to appear in the "monitor" or "recordings" directory. I've restarted A*k as well.. I'll try playing with which keys to use and see if it's a dtmf issue.. A. ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Schall Sent: 19 June 2007 19:48 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Inline record In the features.conf file, under featuremap, add automon => *1 Then in extensions.conf... [general] DYNAMIC_FEATURES=>automon ; Auto Monitor Calls by pressing *1 now if you press *1 while on a call, it will begin recording. Press *1 again and it will complete the recording. Rob Drew Gibson wrote: Adrian Marsh wrote: Hi All, Is there a way to have A*k record calls on-the-fly, at the users request? i.e. a possible scenario: Party A calls Party B During the call, Party A wants to start recording the call, so presses "*", A*k announces "recording.." and starting MixMonitor to a file. Once the call is finished, then A*k emails a copy of the .wav file over... I know that meetme can record calls, and I've been able to record calls from the beginning using Record and MixRecord, but can't see with Dial how you'd have A*k listen for the *. I know that voicemail can email saved messages So I'm guessing this is a mix of the two.. Cheers, Adrian _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users automon http://www.voip-info.org/wiki/index.php?page=Asterisk+config+features.conf _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users