All, I'm using a Digium TE410P w/ Asterisk 1.2.18. Trying to connect it to our NACT STX switch via PRI, d channel is up, T1 shows normal, but I'm getting crazy errors. I rewired this thing three times, then I connected the same cable from the STX to a Cisco AS5300 (same pri settings as asterisk), and all slip events and frame sync errors went away, so the cable is good.
STX --> DSX Panel -->Asterisk I've confrimed all wiring is good, not sure what the issue is, tried playing with the clock source as well, but no dice. Any ideas? Errors: CRC Errors Frame Sync Errors Slip Events 1 Error every second Zaptel.conf loadzone = us defaultzone = us span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs span=3,3,0,esf,b8zs span=4,4,0,esf,b8zs bchan=1-23 dchan=24 bchan=25-47 dchan=48 bchan=49-71 dchan=72 bchan=73-95 dchan=96 TIA, Jon Weisman | Sales Engineer International Bell Communications www.ibell.net www.ibellhost.com www.aeronhelpdesk.com
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
