On Wed, Jun 27, 2007 at 07:41:48PM +1000, Nathan Dennis wrote: > I'm having problems getting an Xorcom USB Bri 4 dialling out in > Australia.
First off, is layer 1 and 2 up? If you use a recent version of our driver (see my previous message) this should be observed by a steady single blink to the port's led (green, as the first two ports are TE). If you're not sure, then what's the output of: egrep 'Layer 1|D-Channel' /proc/xpp/XBUS-*/XPD-*/bri_info > > I can receive calls into the system without an issue, but I can not for > the life of me dial out of the system. Hmmm... this suggests that the problem is with chan_zap's configuration (zapata.conf). > Below are my configs, I'm hoping > its something simple that I just can't see as I've been looking at it > for to long. Can any one point me in the right direction. > > P.S. Yes it is meant to be in TE PTP mode as the current Digium B410P > works fine in that mode > > > > /etc/asterisk/extensions.conf Extract > [internal] > include=>features > include=>speeddial > > > ;Extention number for main Q > exten => 700,1,Goto(mainq,q,1) > > ;----------------------------------------------------- > ;Calling a local extensions mailbox > exten => _*7XX,1,Set(Extension=${EXTEN:1}) > exten => _*7XX,n,Goto(directtovoicemail,s,1) > > ;------------------------------------------------------ > > ;Static externaly accessable Conference room with recording > exten => > 599,1,Set(MEETME_RECORDINGFILE=/var/spool/asterisk/monitor/conference-50 > 0-${EPOCH}); > exten => 599,n,MeetMe(500,cMr,4081) > exten => 599,n,Hangup > > ;Dynamic Conference rooms for internal users to transfer callers to > exten => _5XX,1,MeetMe(${EXTEN},cMd) > exten => _5XX,n,Hangup > > exten => 6000,1,Dial(zap/0418608609) > > > /etc/asterisk/zapata.conf > [channels] Add here: pridialplan=unknown > ;echocancel = yes > ;transfer = yes > callgroup=1 > pickupgroup=1 > > ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" > group=0,11 > context=zapin > switchtype = euroisdn > signalling = bri_cpe > channel => 1-2 > > ; Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" > group=0,12 > context=zapin > switchtype = euroisdn > signalling = bri_cpe > channel => 4-5 > > > ; Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" > ;group=0,13 > ;context=zapin > ;switchtype = euroisdn > ;signalling = bri_cpe > ;channel => 7-8 > > > > ; Span 4: XBUS-00/XPD-18 "Xorcom XPD #0/24: BRI_TE" > ;group=0,14 > ;context=zapin > ;switchtype = euroisdn > ;signalling = bri_cpe > ;channel => 10-11 > > /etc/zaptel.conf > # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit > # Zaptel Configuration File > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > > # It must be in the module loading order > > > # Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" > span=1,1,1,ccs,ami > # termtype: te > bchan=1-2 > dchan=3 > > # Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" > span=2,2,1,ccs,ami > # termtype: te > bchan=4-5 > dchan=6 > > # Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" > span=3,3,1,ccs,ami > # termtype: te > bchan=7-8 > dchan=9 > > # Span 4: XBUS-00/XPD-18 "Xorcom XPD #0/24: BRI_TE" > span=4,4,1,ccs,ami > # termtype: te > bchan=10-11 > dchan=12 > > # Global data > > loadzone = au > defaultzone = au > > > Error recieved in console without group > > -- Executing Dial("SIP/701-09f0fc18", "zap/0418608609") in new stack > Jun 27 19:27:13 NOTICE[4011]: app_dial.c:1089 dial_exec_full: Unable to > create channel of type 'zap' (cause 34 - Circuit/channel congestion) > == Everyone is busy/congested at this time (1:0/1/0) > == Auto fallthrough, channel 'SIP/701-09f0fc18' status is 'CONGESTION' > > > > Error recieved in console with g0 in the dial string > -- Executing Dial("SIP/701-08d76e98", "zap/g0/0418608609") in new stack > -- Requested transfer capability: 0x00 - SPEECH > -- Called g0/0418608609 > -- Zap/1-1 is proceeding passing it to SIP/701-08d76e98 > -- Channel 0/1, span 1 got hangup request > -- Channel 0/1, span 1 received AOC-E charging 0 units > Jun 27 19:28:35 WARNING[4046]: app_dial.c:738 wait_for_answer: Unable to > forward voice > -- Hungup 'Zap/1-1' > == Everyone is busy/congested at this time (1:0/0/1) > == Auto fallthrough, channel 'SIP/701-08d76e98' status is > 'CHANUNAVAIL' > > > > Nathan Dennis > __________________________________________________________ > Integrated Solutions (QLD)P/L Phone: +61 (7) 4044 0300 > Direct: +61 (7) 4044 > 0302 > 124 Spence Street Fax: +61 (7) 4041 6600 > CAIRNS QLD 4868 Mobile: 0418 608609 > > Australia > > E-mail: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > Web Site: www.i-solutions.net.au <http://www.i-solutions.net.au/> > > Offices and agents in Cairns - Brisbane - Melbourne -- Adelaide -- > Sydney > __________________________________________________________ > The information transmitted is intended only for the person or entity to > which > it is addressed and may contain confidential and/or privileged material. > > Any review, retransmission, dissemination or other use of, or taking of > any > action in reliance upon, this information by persons or entities other > than the > intended recipient is prohibited. If you received this in error, please > contact > the sender and delete the material from any computer. > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users