Thanks Tzafrir, that did the trick. But please note the that the bristuff patch from xorcom has broken links in it. It can't download asterisk using the URL in the script. Easy enough to fix by pointing to a known good URL.
________________________________ From: [EMAIL PROTECTED] on behalf of Tzafrir Cohen Sent: Mon 25/06/2007 7:09 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Xorcom Bri 4 Port USB Hi On Mon, Jun 25, 2007 at 06:38:37PM +1000, Nathan Dennis wrote: > > Hi, > I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled > asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. > > So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. > > The problem I'm having is that for one I get no LEDs showing if the unit > is in TE and NT mode (not a issue for me but may have some impact on > things) I have no errors in any logs I can see but once zaptel and > asterisk are started up I get a lots of warnings in asterisk such as > the following What is the output of: modinfo xpp | grep version if this is something of the sort of 'r3495' then you indeed have an older version of the driver where BRI support has not been matuire enough and specifically leds display was not as it is today. In current version (e.g: the one in zaptel 1.2.18/1.4.3) you will always see an orange LED for NT or green led for TE on the port. Please get the version of bristuff from: http://updates.xorcom.com/astribank/bristuff/ http://updates.xorcom.com/astribank/bristuff/bristuff-0.3.0-PRE-1y-g-xr1.tar.gz At least until we see a new version of bristuff. and also see: http://updates.xorcom.com/astribank/bristuff/INSTALL.html Also, for the sake of those who will see the messages in a search: > > Jun 25 18:18:07 WARNING[2833]: chan_zap.c:2662 pri_find_dchan: No D-channels > available! Using Primary channel 3 as D-channel anyway! > == Primary D-Channel on span 2 down > Jun 25 18:18:07 WARNING[2834]: chan_zap.c:2662 pri_find_dchan: No D-channels > available! Using Primary channel 6 as D-channel anyway! > == Primary D-Channel on span 3 down > Jun 25 18:18:07 WARNING[2835]: chan_zap.c:2662 pri_find_dchan: No D-channels > available! Using Primary channel 9 as D-channel anyway! > == Primary D-Channel on span 1 down > This message comes from chan_zap when a span is down. If a span has pri_{cpe,net} signalling or bri_{cpe,net} signalling (bristuff BRI ptp) then you'll get those messages for spans that are down. If the signalling is bri_{cpe,net}_ptmp they'll be debug messages. > It errors for all for ports and makes no difference if I have the > ISDN cables connected or not. I want to run in ptp mode and > currently use a digium B410P card on the connections that work fine > so I know that the lines work and ptp is the correct mode. > > Following are my configs. Any pointers you can give would be greatly > appreciated. > > We are running Fedora 7. > Kernel "Linux 2.6.21-1.3194.fc7 #1 SMP i686 i686 i386 GNU/Linux" (Standard > Kernel with install) > Device has jumpers all set to TE mode. > > > /etc/init.d/zaptel.conf > # Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" > span=1,1,1,ccs,ami > # termtype: te > bchan=1-2 > dchan=3 > > # Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" > span=2,2,1,ccs,ami > # termtype: te > bchan=4-5 > dchan=6 > > # Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" > span=3,3,1,ccs,ami > # termtype: te > bchan=7-8 > dchan=9 > > # Span 4: XBUS-00/XPD-18 "Xorcom XPD #0/24: BRI_TE" RED > #span=4,4,1,ccs,ami > # termtype: te > #bchan=10-11 > #dchan=12 > > # Global data > > loadzone = au > defaultzone = au > > > /etc/asterisk/zapata.conf > [channels] > ; echocancel = yes > ; transfer = yes > ; threewaycalling = yes > > #include zapata-channels.conf > > > /etc/asterisk/zapata-channels.conf > > ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" > callerid=asreceived > group=0 > context=from-pstn > switchtype = euroisdn > signalling = bri_cpe > channel => 1-2 > callerid= > group= > context=default > > ; Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" > callerid=asreceived > group=0 > context=from-pstn > switchtype = euroisdn > signalling = bri_cpe > channel => 4-5 > callerid= > group= > context=default > > ; Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" > callerid=asreceived > group=0 > context=from-pstn > switchtype = euroisdn > signalling = bri_cpe > channel => 7-8 > callerid= > group= > context=default > > ; Span 4: XBUS-00/XPD-18 "Xorcom XPD #0/24: BRI_TE" RED > ;callerid=asreceived > ;group=0 > ;context=from-pstn > ;switchtype = euroisdn > ;signalling = bri_cpe > ;channel => 10-11 > ;callerid= > ;group= > ;context=default -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users