On Tue, 2 Dec 2003, tony banks wrote: > I have 1 IP 7940 with the following Firmware versions > > App Load ID: > > P00303011201 > > Boot Load ID: > PCO303010001 > > Version > 3.1(12.1)
Sounds like a Skinny image to me (and an old one, around CCM 3.1, too.) You can either get a SIP image from cisco and flash your phone with that or try one of asterisk's Skinny channels: - chan_skinny comes with asterisk CVS, is quickly setup, quite stable and provides basically no features except placing and receiving simple calls - chan_sccp supports multiple lines, softkey templates, fastdial buttons, but it may segfault more easily and you'll have to download it from http://www.zozo.org.uk/pages.shtml?page=sccp Both are not really "production quality" right now, so you'd probably be better off flashing your phone with either MGCP or SIP Firmware. OTOH, your firmware is old enough to not require a signed firmware image. So you could theoretically port an IAX stack to the phone ;-) HTH, Siggi _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
