Hi Remco I have used the IP600 v3 with SIP support on Asterisk... apparently I was the 1st person globally to run it at a site. The 1st firmware was a bit buggy at times, but seems to be much better on the later versions.
Kind Regards Garth Garth van Sittert BSc (Physics & Computer Science) ----------------- Mobile: +27 (0)83 791 6662 Email: [EMAIL PROTECTED] Phone: 08600 BITCO MSN: [EMAIL PROTECTED] Web: www.bitco.co.za Remco Barendse wrote: > Hi list! > > Does anyone have experiences with the updated model of the Kirk IP600? > The V3 model is supposed to support SIP instead of only SCCP or H323 which > would make the use with Asterisk a lot easier. > > I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is > still giving me severe headaches : > > - the standard Skinny driver in * doesn't work, only the version of > Sergio Chersovani is working but with some stability problems > - audible echo > - i have 2 kirk handsets and 2 Siemens handsets, the first 2 Kirk handsets > always ring on an incoming call, the Siemens handsets only sometimes ring > (don't know if this is caused by a problem in the SCCP driver or poor > support of the IP600 for non-Kirk phones??) > > Because of my earlier experiences I am hesitating to try the V3 version. > > Experiences anyone? > > Thanks! > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
