echotraning = yes was fixed for x100p's today.  It should work properly
and knock echo off instantly.  I nolonger get 5-10 seconds of echo from
SIP -> ZAP now.

w00t

bkw

On Tue, 2 Dec 2003, Softprofit Solutions wrote:

> I don't think so, is it zapata.conf , echotraining = yes
>
> Please confirm and I will try it
>
> Rob
>   ----- Original Message -----
>   From: TC
>   To: [EMAIL PROTECTED]
>   Sent: Monday, December 01, 2003 7:01 PM
>   Subject: Re: [Asterisk-Users] Tone Detection Problem
>
>
>   is echo training turned on ??
>     ----- Original Message -----
>     From: Softprofit Solutions
>     To: [EMAIL PROTECTED]
>     Sent: Monday, December 01, 2003 3:22 PM
>     Subject: [Asterisk-Users] Tone Detection Problem
>
>
>     This is a resend - customer complains that some phone systems they call don't 
> respond to key tones, please advise.
>
>
>     Thanks Rob.
>
>
>       ----- Original Message -----
>       From: Softprofit Solutions
>       To: [EMAIL PROTECTED]
>       Sent: Monday, November 24, 2003 7:34 PM
>       Subject: tone detection problem
>
>
>       Some commercial systems don't hear the tones dialed from an analog handset, 
> same call is OK from cisco 7940 or sjphone. Calls are placed through asterisk T1 
> card w/12x12 carrier access channel bank, various analog sets.
>
>
>       Thanks for your help.
>
>       Robert J Rae
>       Softprofit Solutions
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to