On Wed, 2007-08-01 at 11:44 +1000, Klaverstyn, David C wrote: > I’m having problems trying to get a TE120P operational in Canada.
[snip] > I’m not sure if the span line is correct. [snip] > span=1,1,0,ccs,hdb3,crc4 This would be right if you're configuring an E1 line, but since you're in Canada you're probably running over a T1 line. And since you're doing PRI over T1, you span might work better if it looks like: span=1,1,0,esf,b8zs (Although I don't see how you'd be getting no alarms on your side if the framing and linecoding was wrong... Hmmmmn...) Also, since you're the CPE (Customer Premises Equipment) or PBX side of the PRI connection, your signalling (yes, you have to misspell signaling and put two ls in there) should be set to pri_cpe, not pri_net. If you have it set to pri_net, you're saying that you're the network or telco side of the connection, and the other end is the CPE or PBX side. -- Jared Smith Community Relations Manager Digium, Inc. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
