I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels" signals to my system, to which he's getting an "establish remote" response from my asterisk box. I've been running a packet dump (wanpipemon -i w1g1 -c trd) of my d-channel this whole time and have yet to see a single incoming packet. I believe I *should* be seeing an incoming packet when he sends the reset, correct? Is there any way to do a completely raw dump of the d-channel?
Here are my specs: linux-2.6.16 libpri-1.3.5 zaptel-1.2.19 asterisk-1.2.21.1 The PRI interface is a Sangoma A102...it's running the latest firmware and I'm running wanpipe-2.3.4-12 for the sangoma drivers. Any ideas? -- Erik Anderson http://andersonfam.org _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
