On Aug 9, 2007, at 9:37 AM, Erik Anderson wrote: > On 8/6/07, Erik Anderson <[EMAIL PROTECTED]> wrote: >> I've been going back and forth with my telco for several days, trying >> different configurations to get a new PRI to come up. The bchannels >> are all up and the T1 is not in alarm status. The dchannel >> refuses to >> come up however. We've tried ni2, qsig, and now dms100 for the >> switchtype. The telco tech I've been working with says that he's >> been >> sending "reset all channels" signals to my system, to which he's >> getting an "establish remote" response from my asterisk box. I've >> been running a packet dump (wanpipemon -i w1g1 -c trd) of my d- >> channel >> this whole time and have yet to see a single incoming packet. I >> believe I *should* be seeing an incoming packet when he sends the >> reset, correct? Is there any way to do a completely raw dump of the >> d-channel? > > Thanks to everyone who offered suggestions on how to troubleshoot this > issue. After working with the telco for over a week on this, I > finally got them to admit today that they have a configuration > problem. I had been telling this since day 1, but they didn't listen > to me. Their change in perspective came when they had a tech come > on-site with a PRI emulator device. He connected that directly to my > asterisk server and was able to make calls with no issues whatsoever. > Fortunately after this final test, they admitted that the problem must > be on their end. Hopefully they'll get it sorted today. > > As an aside, I had a quick question regarding smartjacks. Is there a > jumper or something on the smartjack itself to change from an > old-style E&M T1 to a PRI? I'd think that change would happen in the > telco's switch, but I just thought it might be a possibility. In my > case, as I stated in my original email, the bchannels come up fine, > but not the dchannel. This makes me think it could be something > simple...
It will be something simple, like getting a clueful tech on their end. No the smart jack has no bearing on d channel. Old style or new style the T1 is used however the gear on either end says it should be. The smart jack just passes info through itself. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users