I actually have a small echo problem on my x100p that I haven't gotten around to fixing yet, however my FAX works fine, even at 14.4k. Unless you have a huge echo problem, it should be negligable. -Pat
----- Original Message ----- From: "Andrew Joakimsen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 05, 2003 4:34 AM Subject: RE: [Asterisk-Users] FAX connected to a TDM400 card port > No, but I wouldn't expect it to work because of the echo issues with the > X100P cards. > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of Dan > > Sent: Friday, December 05, 2003 4:27 AM > > To: Asterisk Users > > Subject: [Asterisk-Users] FAX connected to a TDM400 card port > > > > Hi, > > > > I have a FAX machine connected to a TDM400 card FXS port. > > When I receive a fax call through X100 and transfer it to that > extension, > > the FAX machine display REC, but nothing happen (no fax received). > > There is something special to be done for this configuration? > > > > Thanks, > > Dan > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
