On 16/08/07, Steve Davies ([EMAIL PROTECTED]) wrote:
> On 8/16/07, Rory Campbell-Lange <[EMAIL PROTECTED]> wrote:
...
> channel => 1-15,17-31
> Is telling Asterisk that you have 30 active channels. Change it to:
> channel => 1-15,17-25
>
> And you should be sorted.
On 16/08/07, Julian Lyndon-Smith ([EMAIL PROTECTED]) wrote:
> Rory Campbell-Lange wrote:
> > We are trying to configure a Sangoma A101 card to allow both incoming
> > and outgoing calls on a UK (BT) ISDN30e line with only 24 channels
> > enabled.
> >
> > At present incoming calls work fine. We can't call out -- we get a
> > BUSY/CONGESTED error.
>
> What is your dialling plan command for outbound calls ?
> > Do we need another context in our zapata.conf? In other words, do we
> > need to reserve, say, channels 17-24 for outgoing calls? I also wonder
>
> I think that your
>
> channel => 1-15,17-31
>
> should be
>
> channel => 1-15,17-25
We'll try that, thanks for the suggestions.
We have already found that we can now make incoming and outgoing calls
with
pridialplan=unknown
prilocaldialplan=unknown
But there is no sound carrying across the line.
Regards
Rory
--
Rory Campbell-Lange
Campbell-Lange Workshop Ltd.
<[EMAIL PROTECTED]>
<www.campbell-lange.net>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
