On Mon, 20 Aug 2007, bilal ghayyad wrote: > Hi List; > > I am using Firefly softphone Version 1.9.9 Build 4521 > and I select IAX protocol and did the configuration in > Network1 (and I checked the Active checkbox) as > following: > > Server: 192.168.8.4 > username: iax2user1 > password: password > > In the Asterisk, I did the following configuration on > the /etc/asterisk/iax.conf: > > [iax2user1] > type=friend > context=internal > username=iax2user1 > secret=password > host=dynamic > > Then I ran the following: > #/usr/sbin/asterisk -cvvv > CLI>reload > > But always I get a message at the firefly that an > error occured while trying to connect to the network. > > What else I have to do?
Have you checked your firewall? Is it letting UDP data through to the asterisk box on port 4569? > By the way: what is the command that I can type it to > do tracing on the user [iax2user1] or to do traces on > any registeration attempts from the clients? iax2 debug will generate lots of output for you... > Last thing, if I am outside the console (in unix mode), is there any > command from unix I can type it to know if asterisk is running or not? ps ax | grep asterisk is crude, but visual. Asterisk stores it's PID in /var/run/asterisk.pid, so you could then read that, and check to see if the process with that PID is actually running asterisk. ie. see if /proc/<number> existis, and if-so, see if it's actually asterisk by reading /proc/<number>/cmdline or just see if you can connect to it with the rasterisk command ... Gordon _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
