I have this exact same problem with two different Business Edition systems. Both are using TDM400s.
Do we have an answer for this yet? Yours, Michael Munger, dCAP 404-438-2128 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matthew Fredrickson Sent: Thursday, August 16, 2007 2:11 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400P FXO click sounds shadowym wrote: > Please explain to me how FXO tune would fix popping and clicking sounds??? > As mentioned by Stephen, if the echo canceler is improperly tuning that certainly might be possible. But moreover, if there is ambient line noise that is on the line, fxotune will try to pick the best settings on the line interface to either mitigate any line noise that it receives in the audio receive path. One other possibility is you could see if it the clicking and popping correlates to hard drive activity... if that's so, you might have a hard drive or raid controller disabling interrupts for too long. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
