You need to look at pri_cpe vs pri_net. PaulH
On Fri, 2007-08-24 at 01:27 -0700, satish patel wrote: > Dear all > > I have now install TE210P 2 port E1 card on asterisk > 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with > avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing > for outside now i got this error when i call on avaya PRI > > asterisk think PRI_CPE and remote end also CPE > > i have configure /etc/zaptel.conf > > span=1,1,0,ccs,hdb3 > bchan=1-15,17-32 > dchan=16 > span=1,1,0,ccs,hdb3 > bchan=32-46,49-62 > dchan=47 > > > in /etc/asterisk/zapata.conf > > switchtype=qsig > context=zap-in > signalling=pri_cpe > group=1 > channel => 1-15,17-31 > > group=2 > channel => 32-46,49-62 > > > is this configuration is fine or any other problem > > when i call to my second e1 which i connected to direct telcom i got > this error > > call can't forward caz voice or dtmf > > can anyone send my runing configuration file of zaptel.conf or > zapata.conf file > > waiting for your reply > > > > > > > ______________________________________________________________________ > Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see > what's on, when. > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users