----- Original Message ----- From: "Jody Gugelhupf" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, August 27, 2007 3:55 PM Subject: [asterisk-users] voip provider settings problem, please help
> hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but > before i was using asterisk > 1.4 and had the same problem, it concerns an italian voip/sip provider > called eutelia/skypho, my > problem is the following one: > when i start my pbx my skypho account is working fine, meaning that e.g. > incoming calls are shown > in the asterisk CLI and caller and callee can hear each other when picked > up, but after a while it > stops working, incoming calls for this provider are not shown anymore in > the CLI, but from other > providers it always works, but the phone is ringingn nevertheless when > calling my skypho > account...when i then turn off the pbx and restart after sumthing like 2 > hours my skypho account > is working fine again, the incmiong calls are shown in the asterisk CLI, > but after, i don't know > let's say an hour or so it again stops working, incoming calls for my > skypho account can not be > seen in the asterisk CLI, then if i turn off the pbx for an hour or so it > works again, so i > thought it must be a setting issue, maybe something with the register? > althought it always shows > it registered when i use 'sip show registry' someone has an idea what i > have to set or do to have > it working permanently? what could be the problem here? i got no clue > whatsoever and i have been > using asterisk only since half a year, please help me, i'm totaly > desperate, thx in advance > jody :) > Smell's like a NAT issue. Are you behind NAT ? As some one else mentioned try to set qualify=yes as well as register often. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
